| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| z-poxy--final finish http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=15153 |
Page 1 of 1 |
| Author: | bob J [ Fri Dec 28, 2007 12:38 am ] |
| Post subject: | |
Would someone please, again, explain why z-poxy is not used for final finish |
|
| Author: | jhowell [ Fri Dec 28, 2007 12:52 am ] |
| Post subject: | |
Bob-- There are some pretty exhaustive threads on this, but in my experience with epoxy, which comes mostly from boat building, is that epoxy has very little resistance to UV light and degrades fairly quickly. The products in the Marine construction world that counteract this are not conducive to a glass smooth finish.
|
|
| Author: | Michael Dale Payne [ Fri Dec 28, 2007 1:01 am ] |
| Post subject: | |
poor UV resistance, big time dampening, poor buffing characteristics, poor ageing characteristics |
|
| Author: | Hesh [ Fri Dec 28, 2007 1:30 am ] |
| Post subject: | |
Bob buddy JJ actually looked into this and did some tests about a year ago. In addition to what the others have indicated above although epoxy can look killer and really pop the figure it is also not hard enough as a final finish. |
|
| Author: | j.Brown [ Fri Dec 28, 2007 2:41 am ] |
| Post subject: | |
Doesn't buff out well at all. |
|
| Author: | bob J [ Fri Dec 28, 2007 2:55 am ] |
| Post subject: | |
Exactly what I needed, Thanks all, |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|